Skip to main content

The Impact of Cloud Cover on Active Fire Detections

Satellite instruments have trouble discerning fire activity under heavy clouds or smoke cover. These conditions can limit active fire detection.

A recent wildfire in Jasper, Alberta, Canada, which began on July 24, 2024, highlighted the impact of cloud cover on active fire detections. As of August 6, the wildfire had consumed 34,000 hectares (about 84,016 acres) of Jasper, including much of the downtown area.

While some limited detected fire activity was captured by the Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) instruments to the south/southeast of Jasper in the daytime observations on July 24, no additional detections were captured for several consecutive days following these initial detections.

NASA's Fire Information for Resource Management System (FIRMS) received multiple questions from users about the wildfire in Jasper, and this blog explains the reasons for the limited active fire detections during this period.

FIRMS provides active fire detections from both polar orbiting satellites and geostationary satellites. The polar orbiting satellites each typically collect two observations per day over Jasper—once during the day and again about 12 hours later during the night.

On July 24 there was some limited fire activity detected by MODIS and VIIRS further south/southeast of Jasper that was captured on the daytime observations. However, if FIRMS US/Canada users view the MODIS and VIIRS imagery that were acquired on July 24 (the imagery can be loaded by selecting the VIIRS and MODIS Corrected Reflectance imagery within the Dynamic Imagery dropdown), they will notice that the Jasper area was under heavy cloud cover.

Unfortunately, the satellite sensors cannot discern fire activity under heavy clouds or smoke cover and, therefore, under these conditions there will be limited active fire detection. Thick clouds persisted for several days and continued to impact the active fire detections.

The images below were acquired on July 25, July 26, and July 28, and show thick cloud over the Jasper area:

screenshot from FIRMS US/Canada on July 25, 2024, showing heavy cloud cover over Jasper, Canada
Image Caption

FIRMS US/Canada screenshot from July 25, 2024, showing heavy clouds over Jasper, Canada. Red dots indicate the approximate location of MODIS/VIIRS-detected wildfires. Purple colors indicate the approximate location of GOES-detected wildfires. Credit: NASA FIRMS US/Canada.

Screenshot from FIRMS US-Canada on July 26, 2024, showing cloud cover over Jasper, Canada
Image Caption

FIRMS US/Canada screenshot from July 26, 2024, showing clouds over Jasper, Canada. Credit: NASA FIRMS US/Canada.

Screenshot from FIRMS US-Canada showing broken cloud cover over Jasper, Canada
Image Caption

FIRMS US/Canada screenshot from July 28, 2024, showing broken clouds over Jasper, Canada. Credit: NASA FIRMS US/Canada.

FIRMS also provides active fire detections from geostationary satellites. The GOES geostationary satellites (GOES-16 and GOES-18) that provide coverage over this area conduct observations multiple times per hour, but these observations are at a coarser spatial resolution (2 km) than MODIS and VIIRS observations. However, if there is heavy cloud cover or thick smoke, these satellites also cannot detect fire activity.

Users can explore the GOES West Geocolor imagery over the area of Jasper to assess the cloud cover (the FIRMS interface needs to be toggled to "advanced" mode to access these imagery). The FIRMS FAQs also provide additional information on situations when active fires may not be detected.

Details

Last Updated

Published